Latest Technological Onsite Crankshaft Grinding Machine now Available on Low Cost
For satisfactory running and performance of diesel engine or any rotary equipment, it is important that crankshaft is periodically checked dimensionally and for other important parameters. For any correction and repair required in crankpin and main journal diameter of the crankshaft, crankshaft grinding and polishing machine is required. RA Power Solutions is into the field of repair of crankshaft for the last forty years.
Necessity for Onsite Crankshaft Grinding and Polishing Machine
It is observed that after continuous running of engine and crankshaft, it is important that during the major overhaul of the engine crankshaft is inspected for the following main parameters:
- To check taper and ovality of crankpin/main journal diameter
- To check the surface finish of crankpin/main journal
- Inspection of hardness and presence of crack
- Visual inspection for radius fillet and lubricating oil hole
In case of any deviation beyond the manufacturer’s limit is observed in the crankpin and main journal, crankshaft need grinding and polishing. Hence there is a requirement of crankshaft grinding machine which is capable of maintaining the tolerances as stipulated in the manufacturer’s manual.
Change of Technology - In situ Crankshaft Grinding & Polishing Machine
In olden times invariably bench type crankshaft grinding machine was used. These machines were installed in a workshop and it was necessary to disassemble the engine, remove the crankshaft, pack and transport it to the designated workshop. This is now outdated.
The change in technology has been taken place, the heavy duty expensive bench-type crankshaft grinding machines are replaced by portable, lightweight, easy-to-operate in situ crankshaft grinding and polishing machine. There is no requirement of removal of crankshaft from the engine block as the crankpin/main journal grinding and polishing can be done onsite. The machine is inserted from the inspection window.
Main Features of Revolutionary Onsite Crankshaft Grinding and Polishing Machine
- Excellent on site grinding equipment replacing the outdated heavy-duty bench type crankshaft grinding machine.
- Onsite Crankshaft grinding and polishing machine is portable and can be easily carried on board a vessel, power plant or any installation all over the world.
- Easy to operate and easy to maintain.
- Onsite crankshaft grinding and polishing machine is designed to deliver close tolerances in terms of taper and ovality, surface finish, runout and all parameters as per manufacturer’s specifications and tolerance.
- Free onsite training in our workshop is provided.
Quality Aspect of In situ Crankshaft Grinding Machine
We are an ISO certified company and all the quality control norms are strictly followed during the manufacturing of the machine.
Main body of the machine is manufactured out of titanium steel which has the inherent quality of absorbing the vibrations. This facilitates to undertake grinding and polishing of crankshaft even while sailing of the vessel. Every part is subject to stringent inspection and metallurgical properties are improved from time to time based on the field trails and reports.
In situ crankshaft grinding machine is priced low and is affordable for the shipping companies, power plants and for the engine repair workshops. The cost of in situ crankshaft grinding and polishing machine is recoverable in two or three assignments.Stop paying exorbitant prices to European companies for repair of crankshaft and own a machine
The onsite crankshaft grinding and polishing machine is the result of forty years of experience of RA Power Solutions in this line of business. More than 70 machines have been sold worldwide.
For any information on latest technological onsite crankshaft repair machine, crankshaft polisher machine, and onsite inspection of crankshaft please Email us at info@rapowersolutions.com, rajshahani@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.
