Crankshaft Repair Equipment | Crankshaft Grinding | Crankshaft Polishing Machine

Gone are the days when in case of failure of crankshaft it was required to remove it from the engine block and send it to the workshop for grinding and polishing.

With the introduction of onsite crankshaft grinding and crankshaft polishing machines by RA Power Solutions, it is now possible to undertake the crankshaft repair onsite without removing it from the block. 

RA Power Solutions with experience of over forty-three years in the field of crankshaft repair and high-capacity engine overhauling has introduced an onsite crankshaft repair machine which can undertake grinding and polishing of crankshaft on site up to a diameter of 700 mm. This machine is highly recommended for diesel power plants, heavy engineering establishments, shipping companies, engine repair workshops, etc.  We have sold more than seventy machines all over the world.

The crankshaft repair machine can undertake repair of following:

  • All types of cylindrical shafts having bearing sitting diameter up to 700 mm irrespective of its length.
  • Engine crankshaft.
  • Crankshaft of compressor.
  • Pump shaft.
  • Alternator shafts, rotor shafts, turbine shafts.
  • Crankshaft of forging hammers.
  • Main & Auxiliary Diesel engines crankshaft.
   
 
  

Training given for operation of crankshaft repair machine

RA Power Solutions have in house training school based near New Delhi India where the training is provided by our senior engineers covering following:

  • Introduction of crankshaft repair machine and its applications.
  • Description of parts and their importance.
  • Assembly of machines.
  • On-job training is given for calibration, grinding, and polishing of crankshaft.
  • Upkeep and maintenance of crankshaft repair machine
  • We provide training for calibration of crankshaft, hardness check, MPI test, Deflection, and all activities required for inspection of crankshaft to analyze the fault and after the repairs are conducted.
  
 

Cost of Crankshaft repair machine

The cost of a crankshaft repair machine is very low and can be easily recovered by executing 2/3 of repair jobs.

 
 

For your requirement of crankshaft grinding machine, crankshaft grinders, crankshaft grinding repair contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131, 9810012383.